The minimization of voltage sag effect for specially connected transformers with a sensitive load and distributed generation systems

This paper improves the voltage sag for a distributed generation (DG) system with three-phase to two-phase connected transformers. The proposed connection system is compared with the systems designed by Scott and Le Blanc. A particle swarm optimization method with nonlinear time-varying evolution (PSO-NTVE) is used to determine the design values. This analysis considers sensitive loads and the coordination of over-current relays. The model uses a node admittance matrix for voltage sag calculation, in order to calculate the severity of system sag after single or two-phase faults. The analytical equations are useful in the mathematical optimal planning method. The PSO-NTVE is then used to derive suitable transformer impedances and relay time multiplier parameter values. The search for a global optimal solution for the voltage sag problems involves tests on the Scott and Le Blanc connected transformer power systems, in order to verify the effectiveness of the proposed method. Finally, the results show that the severity of the voltage sag is reduced by tuning the transformer impedances and relay settings.     

Using constraints and their value for optimization of large ODE systems

We provide analytical tools to facilitate a rigorous assessment of the quality and value of the fit of a complex model to data. We use this to provide approaches to model fitting, parameter estimation, the design of optimization functions and experimental optimization. This is in the context where multiple constraints are used to select or optimize a large model defined by differential equations. We illustrate the approach using models of circadian clocks and the NF-κB signalling system.     

Bi-objective integrating sustainable order allocation and sustainable supply chain network strategic design with stochastic demand using a novel robust hybrid multi-objective metaheuristic

Sustainability has been considered as a growing concern in supply chain network design (SCND) and in the order allocation problem (OAP). Accordingly, there still exists a gap in the quantitative modeling of sustainable SCND that consists of OAP. In this article, we cover this gap through simultaneously considering the sustainable OAP in the sustainable SCND as a strategic decision. The proposed supply chain network is composed of five echelons including suppliers classified in different classes, plants, distribution centers that dispatch products via two different ways, direct shipment, and cross-docks, to satisfy stochastic demand received from a set of retailers. The problem has been mathematically formulated as a multi-objective optimization model that aims at minimizing the total costs and environmental effect of integrating SCND and OAP, simultaneously. To tackle the addressed problem, a novel multi-objective hybrid approach called MOHEV with two strategies for its best particle selection procedure (BPSP), minimum distance, and crowding distance is proposed. MOHEV is constructed through hybridization of two multi-objective algorithms, namely the adapted multi-objective electromagnetism mechanism algorithm (AMOEMA) and adapted multi-objective variable neighborhood search (AMOVNS). According to achieved results, MOHEV achieves better solutions compared with the others, and also crowding distance method for BPSP outperforms minimum distance. Finally, a case study for an automobile industry is used to demonstrate the applicability of the approach.     

Ant colony approaches for multiobjective structural optimization problems with a cardinality constraint

Two Ant Colony Optimization algorithms are proposed to tackle multiobjective structural optimization problems with an additional constraint. A cardinality constraint is introduced in order to limit the number of distinct values of the design variables appearing in any candidate solution. Such constraint is directly enforced when an ant builds a candidate solution, while the other mechanical constraints are handled by means of an adaptive penalty method (APM). The test-problems are composed by structural optimization problems with discrete design variables, and the objectives are to minimize both the structure’s weight and its maximum nodal displacement. The Pareto sets generated in the computational experiments are evaluated by means of performance metrics, and the obtained designs are also compared with solutions available from single-objective studies in the literature.     

Robust optimization to secure urban bulk water supply against extreme drought and uncertain climate change

Urban bulk water systems supply water with high reliability and, in the event of extreme drought, must avoid catastrophic economic and social collapse. In view of the deep uncertainty about future climate change, it is vital that robust solutions be found that secure urban bulk water systems against extreme drought. To tackle this challenge an approach was developed integrating: 1) a stochastic model of multi-site streamflow conditioned on future climate change scenarios; 2) Monte Carlo simulation of the urban bulk water system incorporated into a robust optimization framework and solved using a multi-objective evolutionary algorithm; and 3) a comprehensive decision space including operating rules, investment in new sources and source substitution and a drought contingency plan with multiple actions with increasingly severe economic and social impact. A case study demonstrated the feasibility of this approach for a complex urban bulk water supply system. The primary objective was to minimize the expected present worth cost arising from infrastructure investment, system operation and the social cost of “normal” and emergency restrictions. By introducing a second objective which minimizes either the difference in present worth cost between the driest and wettest future climate change scenarios or the present worth cost for driest climate scenario, the trade-off between efficiency and robustness was identified. The results show that a significant change in investment and operating strategy can occur when the decision maker expresses a stronger preference for robustness and that this depends on the adopted robustness measure. Moreover, solutions are not only impacted by the degree of uncertainty about future climate change but also by the stress imposed on the system and the range of available options.     

Automated generation of multiphysics simulation models to support multidisciplinary design optimization

To ensure a consistent design representation for serving multidisciplinary analysis, this research study proposes an intelligent modeling system to automatically generate multiphysics simulation models to support multidisciplinary design optimization processes by using a knowledge based engineering approach. A key element of this system is a multiphysics information model (MIM), which integrates the design and simulation knowledge from multiple engineering domains. The intelligent modeling system defines classes with attributes to represent various aspects of physical entities. Moreover, it uses functions to capture the non-physical information, such as control architecture, simulation test maneuvers and simulation procedures. The challenge of system coupling and the interactions among the disciplines are taken into account during the process of knowledge acquisition. Depending on the domain requirements, the intelligent modeling system extracts the required knowledge from the MIM and uses this first to instantiate submodels and second to construct the multiphysics simulation model by combining all submodels. The objective of this research is to reduce the time and effort for modeling complex systems and to provide a consistent and concurrent design environment to support multidisciplinary design optimization. The development of an unstable and unmanned aerial vehicle, a multirotor UAV, is selected as test case. The intelligent modeling system is demonstrated by modeling thirty-thousand multirotor UAV designs with different topologies and by ensuring the automatic development of a consistent control system dedicated for each individual design. Moreover, the resulting multiphysics simulation model of the multirotor UAV is validated by comparing with the flight data of an actual quadrotor UAV. The results show that the multiphysics simulation model matches test data well and indicate that high fidelity models can be generated with the automatic model generation process.     

Solving a new multi-objective multi-route flexible flow line problem by multi-objective particle swarm optimization and NSGA-II

Mass production, meeting the increasing demands of the customers is a necessity. Such a production is mainly dependent on a factory manufacturing called flow line production. This paper deals with special type of production by the name of flexible manufacturing system, assuming the presence of multi processors in each station of a multi-station arrangement. The model debated in the paper possesses three objective functions, the first of which attempts to minimize the weighted delays. The second objective function tries to minimize the capital for the purchase of the processors at stations and the third objective function minimizes the capital dedicated to select the optimum processing route of parts. For the validation of the mathematical model, use has been made of NSAGAII and MOPSO approaches.     

Cooperative differential evolution with fast variable interdependence learning and cross-cluster mutation

Cooperative optimization algorithms have been applied with success to solve many optimization problems. However, many of them often lose their effectiveness and advantages when solving large scale and complex problems, e.g., those with interacted variables. A key issue involved in cooperative optimization is the task of problem decomposition. In this paper, a fast search operator is proposed to capture the interdependencies among variables. Problem decomposition is performed based on the obtained interdependencies. Another key issue involved is the optimization of the subproblems. A cross-cluster mutation strategy is proposed to further enhance exploitation and exploration. More specifically, each operator is identified as exploitation-biased or exploration-biased. The population is divided into several clusters. For the individuals within each cluster, the exploitation-biased operators are applied. For the individuals among different clusters, the exploration-biased operators are applied. The proposed operators are incorporated into the original differential evolution algorithm. The experiments were carried out on CEC2008, CEC2010, and CEC2013 benchmarks. For comparison, six algorithms that yield top ranked results in CEC competition are selected. The comparison results demonstrated that the proposed algorithm is robust and comprehensive for large scale optimization problems.     

The continuous artificial bee colony algorithm for binary optimization

Artificial bee colony (ABC) algorithm, one of the swarm intelligence algorithms, has been proposed for continuous optimization, inspired intelligent behaviors of real honey bee colony. For the optimization problems having binary structured solution space, the basic ABC algorithm should be modified because its basic version is proposed for solving continuous optimization problems. In this study, an adapted version of ABC, ABC_bin for short, is proposed for binary optimization. In the proposed model for solving binary optimization problems, despite the fact that artificial agents in the algorithm works on the continuous solution space, the food source position obtained by the artificial agents is converted to binary values, before the objective function specific for the problem is evaluated. The accuracy and performance of the proposed approach have been examined on well-known 15 benchmark instances of uncapacitated facility location problem, and the results obtained by ABC_bin are compared with the results of continuous particle swarm optimization (CPSO), binary particle swarm optimization (BPSO), improved binary particle swarm optimization (IBPSO), binary artificial bee colony algorithm (binABC) and discrete artificial bee colony algorithm (DisABC). The performance of ABC_bin is also analyzed under the change of control parameter values. The experimental results and comparisons show that proposed ABC_bin is an alternative and simple binary optimization tool in terms of solution quality and robustness.     

金华地区电力通信基础网运维现状分析及维护建议

针对金华地区电力通信基础网的拓扑现状,结合地区网络发展的需求,讨论了基础网传输系统拓扑结构和运维现状存在的设备异常、板卡资源紧张、合理接入等问题,并就金华地区基础网系统拓扑结构层次的合理优化以及运行维护提出可行性建议。